COMMONLY USED TRAILER TERMS

Usually used as a suffix indicating a bumper pull. E.g. Express STK 613 BP.

Tank in a living quarters model that is used for storing waste water and biohazard waste. Usually contains waste that comes directly from the toilet.

Bar attached to wall in dressing room or tack area that is designed to hold blankets.

Padded steel bar that is located at either the head or the tail of the horse to keep it safely in the stall.

Small hooks attached to wall in dressing room or tack area that are designed to hold bridles.

Tray attached to wall in dressing room or tack area that is designed to hold brushes.

Trailer that connects to a ball hitch that’s attached to the tow vehicle’s frame or bumper.

Also called curb side or tail side. The side of the trailer equivalent to the passenger side of a vehicle in North America. So called because each horse’s rear end is located on this side when loaded in a standard slant load trailer.

Mechanism that attaches trailer to tow vehicle.

Also called butt side or tail side. The side of the trailer equivalent to the passenger side of a vehicle in the United States.

Horse trailer with open air spaces in sidewalls on both sides.

Horse trailer that has open air spaces on the curb side and has drop down feed doors on the head side.

Separate room in front of the horse area used for changing and storage.

Tank in living a quarters model that is used for holding fresh water to be used in shower, sink, toilet, etc.

Trailer that attaches to a ball in bed of a pickup or semi truck.

Aluminum, diamond treadplate attached to the lower nose area of a bumper pull. Protects trailer from road debris.

Tank in a living quarters model that is used for holding waste water and non-biohazard waste. Usually contains waste that comes from showers and/or sinks.

A structure designed to reinforce a joint where two or more disconnected parts meet. It is a plate that is welded to the exterior of the separate parts, such that an equal amount of area on the plate covers each part.

Rack that is attached to a trailer’s roof to hold hay or other supplies. Available in various sizes and can either be wrapped in aluminum skin or be attached as a frame only.

Aluminum, “I” shaped beams that run horizontally from one side of the trailer to the other. Serve as a platform for the extruded aluminum flooring that runs vertically.

Trailer that has an area appointed with living accommodations, which may include bed, dinette, kitchenette and bathroom.

Exterior lights used to help load and unload livestock or horses. Located on or above the top rail of the trailer, usually above the rear door(s) or escape door.

The longer sidewall of the dressing room on the curb side of a standard slant load trailer, created by the slanted horse area stalls.

Extra panel beneath stall divider that is used to keep horses more confined and secure. Also called Stud Panel.

Indicates trailer with living quarters. Used as a suffix. E.g. Escape 7310 LQ

A trough located on the interior headside of the horse area that is used to hold food or water for horses.

Tack room located between dressing room and horse area.

Panel that shows the levels of the fresh water tank, grey water tank, black water tank and battery.

Allows the battery on the trailer to be charged by plugging into 110V power supply.

Area in rear of horse area used for storing saddles, harnesses and other gear used for riding and working with horses. In most models, the rear tack wall is collapsible.

Rack located in dressing room or tack area used for storing saddles.

Cord which connects the electrical parts of the trailer, usually a living quarters to a power supply.

The shorter sidewall of the dressing room on the street side, created by the slanted horse area stalls.

Mid tack room located on one side of the trailer. Also known as a closet tack.

Side door located at front of horse area that is used to access horse area and sometimes used as an exit point for handlers while loading/unloading. Usually located at the first stall on the streetside in a slant load and on either side of the front of the horse area on a straight load.

Horses loaded diagonally in trailer.

Located in the rear gate or center gate, a slider provides an opening in the gate, usually for one animal or person to go through.

Horse trailers with smooth (non-extruded) skin aluminum sheet on the trailer’s exterior. Skin color is usually white but also available in a variety of colors.

Indicates straight load. Used as a suffix. E.g. 7200 ST.

Exiss stock combo trailer with dressing room. Generally used by people who show cattle or require extra storage.

Exiss stock trailer with no dressing room. The perfect choice for ranching.

Horses face front when loaded (or head-to-head in four and six horse models). Generally for larger and more active horses.

Also called head side. The side of the trailer equivalent to the driver’s side of a vehicle in the United States.

Rear or center gate that is a one piece design, usually found on a livestock type trailer.

Interior door that leads from either the dressing room or the living quarters area to the horse area.

Horse trailer that has windows on the curb side and has drop down feed doors on the head side.